apache启动报错:httpd: apr_sockaddr_info_get() failed

发布时间:2021-01-22编辑:脚本学堂
重启apache:service httpd restart 虽然重启成功,但却给出如下的提示信息:httpd: apr_sockaddr_info_get() failed for hoteel

重启apache
service httpd restart
虽然重启成功,但却给出如下的提示信息:
httpd: apr_sockaddr_info_get() failed for hoteel
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName

究其原因是因为在配置DNS的时候hostname hoteel造成的,重新hostname localhost就可以了。

附:网上找到的相关文章
1、在启动 httpd 时出现
Starting httpd: httpd: apr_sockaddr_info_get() failed for MYHOST
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName.
这个问题应该是没有在 /etc/httpd/conf/httpd.conf 中设定 ServerName 所以它会用主机上的名称来取代,首先会去找 /etc/hosts 中有没有主机的定义。
所以要解决这个问题可以设定 ServerName 或者在 /etc/hosts 中填入自己的主机名称 MYHOST,像这样:
>vi /etc/hosts
127.0.0.1 localhost.localdomain localhost MYHOST

2、在linux下安装完Apache 2.2.6,启动HTTP服务报错
[root@linux http]# ./apachectl start
httpd: apr_sockaddr_info_get() failed for linux(在BSD上是apr_sockaddr_info_get() failed for freebsdla)
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName

经分析发现是apache的conf目录下的配置文件httpd.conf中关于hostname设置和/etc/sysconfig/network中的HOSTNAME设置不统一导致的,修改成统一的主机名即可解决该问题。

注:/etc/sysconfig/network 默认主机名是:HOSTNAME=localhost.localdomain

PS:网上有这种办法,似乎是没用的,因为我认为apache在编译安装过程中会编译ARP的,因此下述操作有点多余。

apr 和apr-util包含在Apache httpd的发行源代码中,并且在绝大多数情况下使用都不会出现问题。当然,如果apr或apr-util的1.0或1.1版本已经安装在你的系统中了, 则必须将你的apr/apr-util升级到1.2版本,或者将httpd单独分开编译。要使用发行源代码中自带的apr/apr-util源代码进行安 装,你必须手动完成:
 

复制代码 代码如下:

# 编译和安装 apr 1.2

apr
./configure --prefix=/x/httpd/apr
make
make install

apr-util
./configure --prefix=/x/httpd/apr_util --with-apr=/x/httpd/apr
make
make install

apache
./configure --prefix=/x/httpd/apache2
--enable-so
--enable-cgi
--enable-rewrite
--enable-mods-shared=all
--with-apr=/x/httpd/apr
--with-apr-util=/x/httpd/apr_util

LDFLAGS="-L/usr/lib64 -L/lib64"

本机正确设定说明 必须为同一的
[root@spring ~]# nl /etc/hosts
     1 # Do not remove the following line, or various programs
     2 # that require network functionality will fail.
     3 127.0.0.1 localhost.localdomain spring

[root@spring ~]# nl /etc/sysconfig/network
     1 NETWORKING=yes
     2 NETWORKING_IPV6=no
     3 HOSTNAME=spring
     4 #GATEWAY=192.168.8.1

[root@spring ~]# less /etc/httpd/conf/httpd.conf|grep ServerName
# ServerName gives the name and port that the server uses to identify itself.
#ServerName www.example.com:80
ServerName 127.0.0.1